Search
网站标志
Poly-Carboxylate (Powder)
PCE is a superplasticizer for high performance concrete, high strength concrete, high volume fly ash / slag concrete and grouting / self-leveling screed/mortar. Properties

ApPCE is a superplasticizer for high performance concrete, high strength concrete, high volume fly ash / slag concrete and grouting / self-leveling screed/mortar.
Propertiesplication

1
High early strength: Significant increase of early strength and 28d strength.
2
Low slump lose: Great reduction of slump lose.
3
Excellent durability: Reduction of cracking, shrinkage and creep.
4
High water reduction: Water reduction more than 25% according to different application.
5
Environmental friendly products: Non pollution during production.

Specification

                              Items

Specification

Visual Appearance

powder

White or Light Yellow Powder

Bulk density

51 0 ± 10 /m 3

pH 2 3 ℃

20 water solution

9. 0 ± 0.5

Solid Content

98. 0 ± 1.0

Cl - %

≤ 0.10

Na 2 SO 4 %

≤ 4.0

Na 2 O+0.658K 2 O %

≤ 5.0

Viscosity  of 20 %water

solution 2 3 ℃ mPas

11 ± 2

( 0 ℃, 24hours Stability

Stable

Solubility

Very Soluble

Performance Dosages for P.O 42.5 Standard Cement: (wt% of cement)

0.2 0 ± 0.02

Cement Paste Flow

≥ 240

Water Reducing Of Mortar

≥ 20

 

uTest Data-Sheet
the test data-sheet for PCE is showed as follows. It was obtained according to the China National Standard Method
.
 

Test Items

Unit

Specification

Water Reduction Rate

%

≥ 25

Compressive
Strength Ratio

1d

%

≥ 170

3d

≥ 160

7d

≥ 150

28d

≥ 130

Air Content 

%

≤ 6.0

Bleeding Ratio

%

≤ 60

Shrinkage 28d

%

≤ 100

Setting Time Deff.

Ini.

min

-9 0 +120

Fin.

Cl Penetration

coulomb

≤ 2000

F/T Cycles

Time

≥ 300

Slump Retention 60min

≥ 150

 
uDosages
The dosages of different grades of PCE products are suggested as follows (wt.% of cement):
PCE
Pwd : 0.2 0.3
Application Method
1
PCE is used to produce high performance, high strength and flowable concrete.
 
2 Dosage of PCE is determined according to the designated concrete mix through trial mixing.
3
PCE is dosed either together with water or after the addition of water. It shows more effective when PCE is dosed after the addition of water.
uHandling Notes
1
PCE is a weak alkaline liquid or powder. It shows negligible toxic, hazardous, and corrosive. It is inedible.
2
When it contacts to eyes and skin, The affected area shall be immediately rinsed with plenty of water for minutes. Consult physician if irritation persists.
3
Keep container closed when it is not in use. Do not store the product directly under sunlight.
u
Package
1
Powder:20kg Paper drum.
3
It shall be kept from direct sunlight and stored at the ambient temperature greater than its freezing point.
4
The shelf life is twelve (12)months when it is packed with a new drum or tote tank. The shelf life is 60 days when it is opened or packed with recycle drum or tote tank.
u
Precautions:
PCE products are sold as raw materials. It is not suggested to use PCE products directly in concrete or other materials without formulation blending. The compatibility of PCE products to particular cement, aggregate and the other raw materials in the application is not guaranteed. It should be obtained through trial mixes and formulation technologies by the users.
Products Category
Products Search
Copyright(C)Since 2017 QINGDAO SUNCHEM MATERIAL TECH CO LTD